Project cart is empty
iTrans DP-R-22 Dante 2CH Analog Audio Encoder (Rx) with PoE, phoenix port
Please sign in so that we can notify you about a reply
The iTrans DP-R-22 is an audio receiver based on the Dante Ultimo solution. It decodes the signal from the encoder, and converts I2S audio signal to analog signal through DAC module to output. This product transmits signals through Dante network, supporting AES67 RTP audio transmission. It also supports 5-level gain adjustment and PoE power supply
Features- Analog audio output supports balanced/unbalanced audio output (unbalanced access to "+" and "GND")
- Audio sampling rate supports 44.1KHz, 48KHz, 88.2KHz and 96KHz, @16bit/24bit/32bit
- Dante solution supports AES67 RTP audio transmission
- Audio output supports 5-level gain adjustment： +18dBu, +4dBu, 0dBu, 0dBV and -10dBV
- Support DC 12V power supply and PoE power supply (IEEE802.3af Class 1)
Brand:
Infobit
Product Type:
Analog Audio Decoder
Specifications
Cable Length:
100m
HDMI Embedded Audio Channels:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Maximum Operating Temperature:
+40°C
Recording File Format:
PCM 2.0 44.1kHz/48kHz/96kHz, up to 24bit
Audio Decoding Type:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Special Features:
Dante Solution Supports AES67 RTP Audio Transmission
Control Interface Type:
1xRJ45
User Interface Indicator Type:
LED
Humidity:
20 to 90%
Minimum Operating Temperature:
0°C
Includes:
1×iTrans DP-R-22, 1×6Pin-3.81mm Phoenix Connector, 1×2pin-3.81mm Phoenix Connector, 1×User Manual
Performance
Bit Rate:
24bit
Audio Encoding and Bitrate:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Inputs and Ports
Audio Input Type:
PCM 2.0@16bit/24bit/32bit, 44.1kHz/48kHz/88.2kHz/96kHz
Input Port Type:
1×Dante
Output Port Type:
2×Audio
Interface Type:
1xRJ45
Connectivity
Network Switch Type:
100/1000M Network Switch
Power
Current Rating:
1A
Power Source Type:
PoE, External Supply
Dimensions
Width:
13cm
Depth:
7cm
Height:
2.6cm
Weight:
230g
Other
Voltage Rating:
12V DC
Standards Met:
IEEE802.3af Class 1
Warranty:
3 years
No reviews found